Vici Selectors (multiposition) Microelectric Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Vici Selectors (multiposition) Microelectric herunter. VICI Selectors (multiposition) Microelectric User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 9
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1
Technical Note 415
Valco Instruments Co. Inc.
Multiposition
Microelectric Valve Actuators
Models EMH and EMT
The microelectric multiposition actuator consists of a control module, a steppermotor/gearbox assembly,
a manual controller (use is optional), a universal AC input (100-240 VAC, 50-60 Hz) to 24 VDC power
supply, and the interconnecting cables.
The time it takes to step a valve from one position to another depends upon the actuator model, the
number of positions for which the actuator is set, and the total amount of rotation involved. Actual
times can be computed from the tables below.
NOTE: With the exception of Valco P type valves (which have a visible coil spring), all our multiposi-
tion valves are keyed to provide automatic alignment on a microelectric actuator. However, not all
standoffs (an extension which holds the valve away from the actuator) are keyed. Therefore, if you
are ordering components separately or retrofitting a valve and actuator with a standoff, make sure you
specify a keyed standoff so that you can take full advantage of the ease of alignment provided by a
keyed standoff, microelectric actuator, and valve.
Installation and Use
Getting Started
Figure 1 on the next page shows the functions of the cables supplied with the actuator. There are four
connectors on the control module, keyed and sized to prevent incorrect connection.
Number of
positions
set















Time req.
to move
one position
Time per
additional
position
EMH
(
high speed
)
actuator












Number of
positions
set



Time req.
to move
one position
Time per
additional
position
EMT
(
high torque
)
actuator
Seitenansicht 0
1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - Microelectric Valve Actuators

1Technical Note 415 Valco Instruments Co. Inc.Multiposition Microelectric Valve ActuatorsModels EMH and EMTThe microelectric multiposition actuator co

Seite 2 - CONTROL MODULE

2MULTIPOSITION ACTUATORCONTROL MODULEPOSITIONROTATIONSTEP HOMEPUSH BOTH BUTTONSSIMULTANEOUSLYTO REVERSE DIRECTIONVALVECLAMPSCREWCLAMPRINGMOTOR/GEARBOX

Seite 3 - Mounting

3Cable and Connector FunctionsInput power (20 – 30 VDC, with 24 – 28 VDC preferred) is supplied through a miniature power connec-tor: the inner pin is

Seite 4 - Digital Protocols

4Simultaneous Use of the Manual Controller and an External Control SystemThe manual controller has two identical connectors for input and/or output, p

Seite 5 - Code sequence break

5Pin signal definitions for the Digital Input/Output cableSignalHomeMotor runStepErrorManual Dir.DirectionAuto Dir.Data latch+5 VDC 100 maGround80 BCD

Seite 6 - only 8 positions:

6Serial Control of the ActuatorEstablishing Serial CommunicationsItems required:• Valco cable assembly I-22697 or equivalent• Terminal emulation or co

Seite 7 - beginning on the next page.)

7Serial CommandsNP<enter> Displays the number of positions the actuator is currently set to indexNPnn<enter> Sets the number of positions

Seite 8 - Serial Communication Protocol

8Serial Communication ProtocolSerial communication is based on an ASCII string protocol. Carriagereturn (OD hex) characters parse the communications

Seite 9 - Figure 4: Control module

   

Kommentare zu diesen Handbüchern

Keine Kommentare